ALPS Liberty™ Liner
PART # VSDT
ALPS Liberty Liner allows the expulsion of humidity and air trapped between the user’s skin and the liner through a built-in valve, either on the pin or the reducer.
It is made of HD Gel and covered by an innovative seamless knitted fabric for maximum comfort and control.
It is recommended to counter the problem of excessive perspiration.
The Liberty Liner allows the expulsion of air and humidity through a built-in valve integrated either on the pin or the reducer, promoting a healthy environment.
Used in conjunction with a nylon sheath, it presents a superior capacity for collecting and expelling humidity.
The HD gel improves the stability of the prosthetic leg and provides greater protection against vertical and shear forces.
It is recommended to minimize the problem of excessive perspiration.
Protects the residual limb thanks to the high capacity of the HD Gel to absorb vertical and shear forces.
Promotes a healthy environment due to the distal valve that expels air and humidity between the residual limb and the liner.
Ensures a high level of control of the prosthetic leg and minimizes soft tissue movement thanks to the High Density Gel.
Since it is used in conjunction with a nylon sheath, it has a superior capacity for collecting and expelling humidity.
MATERIAL | HIGH DENSITY GEL
FABRIC | SEAMLESS
Liberty Liner VSDT Sizing Chart
Measure the circumference of the stump at 6 cm above the distal end.
|MEASURED SIZE (CM)||VSDT - LOCKING 3 OR 6MM UNIFORM|
|20-23 cm||VSDT20 - (3 or 6)|
|24-25 cm||VSDT24 - (3 or 6)|
|26-27 cm||VSDT26 - (3 or 6)|
|28-31 cm||VSDT28 - (3 or 6)|
|32-37 cm||VSDT32 - (3 or 6)|
|38-43 cm||VSDT38 - (3 or 6)|